Canon PowerShot A400 Silver Software Starter Manual page 18

14
Installing the Software and USB Driver
See Uninstalling the Software (p. 79) to delete the installed programs.
11
Attach the camera to the computer with the
interface cable and set it to the correct mode
for connecting.
Procedures for attaching the camera to the computer and placing it in
the correct mode for connecting vary between camera models. See
Information about Your Camera (p. 92).
If the Digital Signature Not Found window appears, click [Yes].
The USB driver will automatically finish installing onto the computer when you attach the
camera and open a connection.
Windows XP
The dialog on the right will appear after a
few moments and the USB driver supplied
with the Windows operating system will
automatically install.
Windows 2000/Windows Me/Windows 98
Restart the computer according to the instructions if you are prompted to do so by a
message.
A dialog allowing you to set the default settings will display after installation. See Using
the Software on the Windows Platform
procedures.
• See USB driver installation not proceeding well in the Troubleshooting
section (p. 83) if you are having problems installing the USB driver.
• See Uninstalling the USB Driver (p. 79) to delete the USB driver installed
with these procedures.
• See If You Were Using ZoomBrowser EX Version 2 or 3 (p. 91) if you
were previously using either version.
This concludes the software and USB driver installation and the procedures for connecting the
camera to the computer.
You may now download camera images to the computer (p. 15).
–
The Basics (p. 15) for the subsequent