Powershot A95 - Canon PowerShot A400 Silver Software Starter Manual

PowerShot A95

How to Connect the Camera to a Computer and Prepare to Transfer Data
1
Attach the supplied interface cable to the computer's USB port and the camera's
DIGITAL terminal as shown below.
2
Set the mode switch to the playback mode and turn the camera's power on.
This will prepare the camera to exchange data with the computer.
CD-ROMs in the Package
•Canon Digital Camera Solution Disk
•ArcSoft Camera Suite 1.3
See ArcSoft Camera Suite 1.3 CD-ROM (p. 77) for information about the features and
installation procedures for the programs on the disk.
Non-Supported Programs and Features
The camera does not record RAW images.
USB Port
1. Open the terminal cover by slipping
Interface Cable
2. Insert the interface cable connector
To the DIGITAL
Terminal
a fingernail under its left edge.
all the way into the digital terminal
until it clicks.
99