Storage And Maintenance - Samsung LN40C500F3F User Manual

5 series
Hide thumbs Also See for LN40C500F3F:
Table of Contents

Advertisement

Available languages

Available languages

Other Information
Issues
A "Mode Not Supported" message
appears.
Caption on TV menu is greyed out.
There is a plastic smell from the TV.
The TV Signal Strength is unavailable in
the Self Diagnostic Test menu.
The TV is tilted to the side.
The channel menu is greyed out
(unavailable).
Your settings are lost after 30 minutes or
every time the TV is turned off.
You have intermittent loss of audio or
video.
You see small particles when you look
closely at the edge of the frame of the TV.
POP (TV's internal banner ad) appears on
the screen.
This TFT LCD panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However,
there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the
product.
¦
Storage and Maintenance
Do not spray water or a cleaning agent directly onto the
product. Any liquid that goes into the product may cause a
failure, fire, or electric shock.
34
English
Solutions and Explanations
Check the supported resolution of the TV, and adjust the external device's output resolution
accordingly. Refer to the resolution settings on page 12 of this manual.
Caption can not be selected in the TV menu when connected via HDMI or Component (p. 22).
Caption must be activated on the external device (p. 22).
This smell is normal and will dissipate over time.
This function is only available with digital channels from an Antenna / RF / Coax connection (p. 24).
Remove the base stand from the TV and reassemble it.
The Channel menu is only available when the TV source is selected.
If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Change
the settings from Store Demo mode to Home Use mode in the Plug & Play procedure. Press the
SOURCE button to select TV mode, and go to
Check the cable connections and reconnect them.
Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are
flexible enough for long term use. If mounting the TV to a wall, we recommend using cables with 90
degree connectors.
This is part of the product's design and is not a defect.
Select Home Use under Plug & Play mode. For details, refer to Plug & Play Feature (p. 8).
→ Setup → Plug & Play → ENTERE (p. 8).
MENU
Clean the product with a soft cloth dapped in a small amount
of water.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ln40c500f3fxzaLn40c500

Table of Contents