Stamina 15-1100 Owner's Manual page 11

ASSEMBLY INSTRUCTIONS
STEP 8
There is an "L" mark on the bottom side of the LEFT REST PEDAL(62), and an "R" mark on the bottom
side of the RIGHT REST PEDAL(63).
Attach the RIGHT REST PEDAL(63) to the HANDLEBAR SHAFT(69) in the RIGHT HANDLEBAR(7)
with WAVY WASHER(ø17xø22x0.4mm)(49), WASHER(ø10xø25.4x2mm)(61), and the SHAFT
BOLT(65). Press the PEDAL COVER(64) into the RIGHT REST PEDAL(63). Repeat on other side.
STEP 9
NOTE: The RIGHT PEDAL(56) has R stamped on the end of the pedal shaft. The RIGHT PEDAL(56)
has right hand threads and is tightened by turning clockwise. The LEFT PEDAL(55) has L
stamped on the end of the pedal shaft. The LEFT PEDAL(55) has left hand threads and is
tightened by turning counterclockwise.
Thread the RIGHT PEDAL(56) into the RIGHT CRANK(54) as shown. Tighten the pedal securely.
Repeat on the left side to attach the LEFT PEDAL(55) to the LEFT CRANK(53).
L
11
R