Loudspeaker Connection - Behringer Europower PMP960M User Manual

EUROPOWER PMP960M/PMP980S/PMP1280S User Manual
Please use a dual footswitch for the PMP980S/PMP1280S, so
◊
that you can enable/disable FX1 and FX2 independently of
each other. In this case, the tip of the ¼" plug controls FX1,
and the ring FX2.
tip
sleeve
shield
Fig. 4.5: RCA cable
4.3

Loudspeaker connection

Your PMP mixer is equipped with high-quality twist-lock
professional style loudspeaker connectors, which ensure safe
and trouble-free operation. This connector was especially
developed for high-power loudspeakers. Once it is plugged in, it
safely locks into position and cannot be accidentally disengaged.
It prevents the occurrence of electrical shock and ensures the
correct polarity. Each of the connectors carries only the assigned
single signal (see tab. 4.1/fig. 4.7 and the information on the rear
panel of the power mixer).
+1
-2
+2
front view
-1
rear view
Professional speaker connector
(compatible with Professional
twist-lock style connector)
Fig. 4.6: Professional twist-lock style connector
tip
sleeve
-1
+1
-2
+2
Please be sure to only use professional locking-style speaker
cables (type NL4FC). Please check the pin connections of your
loudspeakers and cables depending on the EUROPOWER
speaker output you choose.
Tab 4.1: Pin connections of loudspeaker connectors
Fig. 4.7: Connector assignment
9