MINIFEX FEX800
Fig. 4.3: Connecting the MINIFEX to an amplifier or D.I. box
5. AUDIO CONNECTIONS
There are various ways to integrate the FEX800 into your set-up. Depending on the application in
question, you will need different sets of connecting cables. The cables to use are described below.
5.1 Connection with insert cables
Please use standard insert cables equipped with 1/4" connectors to connect the MINIFEX to the
insert path of a mixing console. These Y cables have two 1/4" TS connectors at one end, and one 1/
4" TRS connector at the other. Connect the plug marked Send to the INPUT L jack on the effects
unit. Connect the Return plug to the OUTPUT L jack on the device. Connect the TRS connector to
the insert jack of the channel strip on the mixing console. Use two insert cables for stereo sub-
groups and main-mix inserts. The second cable must be connected to the INPUT/OUTPUT R jacks
of the FEX800.
12
5. AUDIO CONNECTIONS