Termination Of Memory Viewer - Sanyo WXU30 - PLC - LCD Projector Owner's Manual

Image viewer in the program mode
1. Select "Program" on "Menu" of the browser window of the memory viewer. And press SELECT button.
The program files (.dpf ) in the DispParam folder under the top directory are displayed.
* If the DispParam folder is not placed in the top directory, the list of the folder name is displayed. Find
the DispParam folder which stores the program file manually to display the contents of the folder.
2. Select a program file with point buttons and press SELECT button. The dialogue window appears
and select "Yes" and press SELECT button to start the auto display. The images programmed by
program file are displayed on the screen. The display period of the image and the number of repeat
are set with the program file.
3. During displaying the image, you can control the displayed image with control buttons as described
in the table below.

Termination of memory viewer

To terminate the memory viewer function, take one of methods described below.
- Terminate with projector's on-screen menu.
1. Select "Wired" or "Wireless" from the input menu of the projector. Press SELECT button.
2. Select "Memory Viewer" with the point ed buttons and press SELECT button. The "Enter/Exit" pallet
of the memory viewer appears.
3. Select "Exit" and press the SELECT button.
- Terminate with memory viewer mode
1. During the image displaying, press AUTO SETUP/CANCEL button. The browser window appears on
the screen.
2. Press AUTO SETUP/CANCEL button again. The cursor moves to menu item.
3. Select "Exit" on the browser window with the point 7 8 buttons and press SELECT button.
While operating the memory viewer, the Network Viewer and Network Capture function cannot be used.
* The program file (.dpf ) is created with the program editor software. For further information, see the
item "Creating the program file [Program Editor]" (p.115) described on the separated booklet of
network owner's manual.
* The DispParam folder is automatically created when the program file with the program editor is
stored. For further information, see the item "Creating the program file [Program Editor]" (p.115)
described on the separated booklet of network owner's manual.
* When storing the program file into the SD memory card manually, create folder with the name of
"DispParam" and store the program file into this folder.
* In the program mode, the browser window lists the program files and folders only. Other files are
not listed.
Point Operation
d
Manual playback with next file
e
Manual playback with previous file
8
Start auto-playback
7
Stop auto-playback