Entering The Memory Viewer Mode - Sanyo WXU30 - PLC - LCD Projector Owner's Manual

Entering the memory viewer mode

1. Select "Wired" or "Wireless" from the input menu of the projector. The "Please wait... " message will be
displayed on the screen. After short time, the network connection standby display screen "Ready for
use" will appear.
2. Insert the SD memory card into the card slot on the back side of the projector. The card indicator
lights up.
3. Select "Wired setting" or "Wireless setting" in the projector menu, and press SELECT button.
4. Select "Memory Viewer" with the point ed button and press SELECT button. The "Enter/Exit" pallet
of the memory viewer appears.
5. Select "Enter" and press SELECT button. The memory viewer start-up image appears briefly and an
image stored in the SD memory card is displayed on the screen.
* If the image file is not available in the root directory of the SD memory card, the memory viewer
browser window appears.
Memory viewer
Wireless setting
Wired setting