Sanyo WXU30 - PLC - LCD Projector Owner's Manual page 10

Memory viewer function
Duplicating the data into the SD memory card
It is described how to duplicate the data converted with the Network Viewer 4 [File Converter 1, File
Converter 2] into the SD memory card through the network.
1. Launch the explorer software of the computer and type the IP address of the network board which
has the SD memory card onto the address column. For example, "ftp://192.168.1.201".
The contents of the SD memory card appear on the explorer window as below.
2. Move the projection data from the computer into the SD memory card.
Note:
If the network PIN code is set for the projector, the authentication window appears as below. In that
case, enter "user" into the User Name column and the network PIN code of the projector into the
Password column. *User Name must be "user".
10