Intrepid 6140 Director - McDATA StorageWorks 2/140 - Director Switch Planning Manual

Products in a san environment
Hide thumbs Also See for StorageWorks 2/140 - Director Switch:
Table of Contents

Advertisement

Introduction to McDATA Multi-Protocol Products
1
Intrepid 6140
Director
McDATA Products in a SAN Environment - Planning Manual
1-10
— Universal port module (UPM) cards. Each UPM card provides
four 2.1250 Gbps Fibre Channel port connections through
duplex SFP fiber-optic transceivers.
— Ten-gigabit port module (XPM) cards. Each XPM card
provides one 10.2000 Gbps Fibre Channel port connection
through a duplex ten-gigabit small form factor pluggable
(XFP) fiber-optic transceiver.
For FPM, UPM, and XPM cards, shortwave laser transceivers are
available for transferring data over multimode fiber-optic cable.
Longwave laser transceivers are available for transferring data
over singlemode fiber-optic cable. Fiber-optic cables attach to
director port transceivers with duplex LC
The power module assembly at the rear of the director also provides a
9-pin, type-D subminiature (DSUB) maintenance port for connection
to a local terminal or remote terminal. Although the port is typically
used by authorized maintenance personnel, operations personnel can
use the port to configure director network addresses.
The Intrepid 6140 Director is a third-generation, enterprise-class
product that provides switched fabric connectivity for up to 140 Fibre
Channel devices. The product provides high-performance scalable
bandwidth, highly-available operation, redundant switched data
paths, long transmission distances (up to 20 km), and high device
population.
Figure 1-3
illustrates the director.
The director supports McDATA's non-blocking EON architecture and
concurrent firmware downloads through HotCAT technology. The
director also provides a modular design that enables quick removal
and replacement of FRUs, including:
• Front bezel with power (green) and system error (amber) LEDs.
• Redundant CTP (2.1250 and 10.2000 Gbps operation) logic cards.
• Redundant SBAR assembly logic cards.
• Redundant cooling fans.
• Redundant power supply and AC modules.
• Backplane.
®
connectors.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents