Power Requirements; Eclipse 1620 San Router - McDATA StorageWorks 2/140 - Director Switch Planning Manual

Power Requirements

Eclipse 1620 SAN Router:

Height: 4.1 centimeters (1.6 inches) or 1 rack unit.
Width: 43.7 centimeters (17.2 inches).
Depth: 45.7 centimeters (18.0 inches).
Weight: 5.9 kilograms (13.0 pounds).
Eclipse 2640 SAN Router:
Height: 4.1 centimeters (1.6 inches) or 1 rack unit.
Width: 43.7 centimeters (17.2 inches).
Depth: 68.6.7 centimeters (27.0 inches).
Weight: 10.9 kilograms (24.0 pounds).
McDATA products have the following nominal power requirements:
Intrepid 6064 Director:
Input voltage: 100 to 240 VAC.
Input current: 2.0 amps at 208 VAC.
Input frequency: 47 to 63 Hz.
Intrepid 6140 Director:
Input voltage: 200 to 240 VAC.
Input current: 4.2 amps at 208 VAC.
Input frequency: 47 to 63 Hz.
Intrepid 10000 Director:
Input voltage: 180 to 270 VAC.
Input current: 12.0 amps at 208 VAC.
Input frequency: 47 to 63 Hz.
NOTE: The Intrepid 10000 Director must be connected directly to facility
power outlets. The director draws a current of 32 amperes at power-on,
and must not be connected to power strips in the FC-512 Fabricenter
equipment cabinet.
Product Specifications
Product Specifications
A-3