Telnet Commands - HP StorageWorks 2/16 - SAN Switch User Manual

Telnet Commands

fazoneAdd
Add a member to a Fabric Assist zone.
Synopsis
fazoneAdd "fazoneName","fazoneMember; fazoneMember"
Availability
admin
Description
This command adds one or more members to an existing Fabric Assist zone.
fazoneName is the name of an existing Fabric Assist zone. fazoneMemberList is a
semi-colon separated list of one or more:
Note:
using the cfgShow command) until the cfgSave command is issued. For the change to
become effective, an appropriate Fabric Assist zone configuration must be enabled
using the cfgEnable command. For the change to be preserved across switch reboots, it
must be saved to non-volatile memory using the cfgSave command.
Operands
The following operands are required:
"fazoneName"
"fazoneMember"
Quickloop Fabric Assist User Guide
Physical fabric port numbers
WWNs
Zone alias names
Exactly one Fabric Assist host member
This command does not change the defined configuration (which you can view
A name for the Fabric Assist zone in quotation marks.
A list of Fabric Assist Zone members. The list must be
enclosed in quotation marks, and each member must be
separated by a semi-colon.
Fabric Assist Mode Telnet Commands
45