Bloom_System Error Messages; Bloom-Bad_Id; Bloom-Buf_Reclaimed - HP StorageWorks 16-EL - SAN Switch Reference Manual

Bloom_System Error Messages

BLOOM is the name of the current ASIC chip. BLOOM error messages come
from the BLOOM ASIC driver for this chip.

BLOOM-BAD_ID

Message
<switch number> Warning BLOOM-BAD_ID, 3, <port number> IU in <message
string> has bad ID (S_ID = <SID number>, D_ID = <DID number>)
Explanation
A bad source ID or destination ID was reported on the specified slot and port
number.
Recommended Action
Run portlogdisable and supportshow (in order) to capture debug
information and then contact Technical Support. Technical Support may also ask
for additional debug information from POST and systemtest.
Severity
Warning

BLOOM-BUF_RECLAIMED

Message
<switch number> Info BLOOM-BUF_RECLAIMED, 4, <port number>
Explanation
If the specified port was previously disabled because no buffer was available, the
port is now enabled because a buffer has been made available in the same quad.
Diagnostic and System Error Messages Version 3.1.x Reference Guide
Bloom_System Error Messages
27