Status Read Command; Format; Transfer Example; Operation Requirements - Sanyo PLC-ZM5000L - 5000 Lumens Manual

PLC-ZM5000/ZM5000L Basic Serial Command Functional Specifications
7

Status Read Command

7.1 Format

0û
PC issues a command in the following format.
"CR" Command [CR]
Command: one character (See Status Read Command Table)
0û When projector receives an appropriate command, it returns the required data in string.
Required Data [CR]
Required Data: string (See Status Read Command Table)
0û When the received data cannot be decoded, the projector returns "?" [CR] is returned.

7.2 Transfer Example

Information for Input mode of projector can be obtained by Basic Commands.
PC ! ' Projector
Projector ! '

7.3 Operation Requirements

Status Read commands are invalid when projector is in standby and "Eco" mode selected in
Standby mode menu.
Command (issue current input mode command)
"C" "R"
PC
23/28
"1" CR
! • ! ' Response
(A few )
ms - 5 s
(Indicating Computer 1 is selected)
"1" CR