Input 3 Command; Network Command; Volume + Command; Sound Mute On Command - Sanyo PLC-ZM5000L - 5000 Lumens Manual

PLC-ZM5000/ZM5000L Basic Serial Command Functional Specifications

6.10 INPUT 3 Command

Command "C07" [CR]
Select Input 3. This command works differently from the command by "Input 3"
key of the remote control. When Input 3 has been selected, this command does
Detail not execute the source switching; just for switching to Input 3.
Although projector returns "OK", Input search is not executed with this command
while Input button is set to Mode2 or Mode3.
Acceptable
Response
Unacceptable

6.11 NETWORK Command

Command "C08" [CR]
Select Network Input.
Detail Although projector returns "OK", Input search is not executed with this command
while Input button is set to Mode2 or Mode3.
Acceptable
Response
Unacceptable

6.12 VOLUME + Command

Command "C09" [CR]
Volume Up.
Detail
This command works the same way as "VOLUME +" button of the remote control.
Acceptable
Response
Unacceptable
6.13 VOLUME – Command
Command "C0A" [CR]
Volume Down.
Detail
This command works the same way as "VOLUME -" button of the remote control.
Acceptable
Response
Unacceptable

6.14 SOUND MUTE ON Command

Command "C0B" [CR]
Sound Mute On.
Detail This command works the same way as "MUTE" button of the remote control for
Sound Mute On, but does not work for Sound Mute Off.
Acceptable
Response
Unacceptable
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
13/28