64-Bit / Vista; Driver Installation Guide - ASROCK Z68 Pro3 Gen3 Quick Installation Manual

Quick installation guide
Hide thumbs Also See for Z68 Pro3 Gen3:
Table of Contents

Advertisement

Serial port Header
(9-pin COM1)
(see p.2 No. 26)
HDMI_SPDIF Header
(2-pin HDMI_SPDIF1)
(see p.2 No. 27)
2.9

Driver Installation Guide

To install the drivers to your system, please insert the support CD to your optical
drive fi rst. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom side
to install those required drivers. Therefore, the drivers you install can work properly.
2.10
Installing Windows
With RAID Functions
If you want to install Windows
/ SATAII / SATA3 HDDs with RAID functions, please refer to the document at the
following path in the Support CD for detailed procedures:
..\ RAID Installation Guide
RAID mode is not supported under Windows
2.11
Installing Windows
/ XP 64-bit Without RAID Functions
If you want to install Windows
bit OS on your SATA / SATAII / SATA3 HDDs without RAID functions, please follow
below procedures according to the OS you install.
28
1
GND
SPDIFOUT
®

7 / 7 64-bit / Vista

®
7 / 7 64-bit / Vista
®
7 / 7 64-bit / Vista
®
7 / 7 64-bit / Vista
ASRock Z68 Pro3 Gen3 Motherboard
This COM1 header supports a
serial port module.
HDMI_SPDIF header, providing
SPDIF audio output to HDMI
VGA card, allows the system to
connect HDMI Digital TV/
projector/LCD devices. Please
connect the HDMI_SPDIF
connector of HDMI VGA card to
this header.
TM
TM
/ Vista
64-bit
TM
TM
/ Vista
64-bit on your SATA
®
XP / XP 64-bit OS.
TM
TM
/ Vista
64-bit / XP
TM
TM
/ Vista
64-bit / XP / XP 64-

Advertisement

Table of Contents
loading

Table of Contents