Hardware Health Event Monitoring Screen - ASROCK X79 Extreme3 User Manual

3.5 Hardware Health Event Monitoring Screen

In this section, it allows you to monitor the status of the hardware on your system,
including the parameters of the CPU temperature, motherboard temperature, CPU
fan speed, chassis fan speed, and the critical voltage.
CPU Fan 1 & 2 Setting
This allows you to set CPU fan 1 & 2's speed. Confi guration options: [Full
On] and [Automatic Mode]. The default value is [Full On].
Chassis Fan 1 Setting
This allows you to set chassis fan 1's speed. Confi guration options:
[Full On], [Automatic Mode] and [Manual]. The default value is [Full On].
Chassis Fan 2 Setting
This allows you to set chassis fan 2's speed. Confi guration options:
[Level 1] to [Level 4]. The default value is [Level 4].
Chassis Fan 3 Setting
This allows you to set chassis fan 3's speed. Confi guration options:
[Level 1] to [Level 4]. The default value is [Level 4].
SB Fan 1 Setting
This allows you to set SB fan 1's speed. Confi guration options: [Full On]
and [Automatic mode]. The default value is [Automatic mode].
Target SB Temperature
This allows you to set the target temperature to activate ASRock
X-FAN. The default value is [50
Target Fan Speed
This allows you to set target fan's speed. The default value is [Level
1] (ASRock X-FAN deactivated).
Over Temperature Protection
Use this to enable or disable Over Temperature Protection. The default
value is [Enabled].
o o
C/122 F].
64