No CD-ROM Drive?
If you do not have a CD-ROM drive, there are three ways you
can get access to a printer driver:
1 Visit the Okidata web site at http://www.okidata.com and
download the printer drivers.
2 If you can locate a CD-ROM drive on another system, you
can use the CD-ROM to create diskettes.
Close all open applications.
Insert the OKIPAGE 10e CD into the CD-ROM drive.
Click the Start button on the Windows taskbar, then
click Run.
Enter d:\install (assuming "d" is the location of the CD
ROM drive). Click OK.
The OKI Menu Installer Setup window appears.
Click Create Diskettes to create your diskette.
|
E-16
OKIPAGE 10e
3 Order a 3.5" diskette kit. It contains a Windows driver
that will allow you to use your printer. Follow the
instructions in the README.TXT file on the diskette to
install it. To obtain a set of diskettes, call 1-888-232-8530
and request the appropriate set.
Windows 3.1
MS 10691/0699
Windows 95
MS 10692/0699
Windows 98
MS 10693/0699
Status Monitor
The status monitor program allows you to monitor and
configure an OKIPAGE 10e that is connected to your parallel
port. In addition to displaying printer status messages, the
status monitor provides remote access to the printer's
operator panel.