Printing The Demo And Menu Pages; Interfacing With Your Computer; Connecting The Cable - Oki OKIPAGE10e Quick Start Manual

Printing the Demo and Menu Pages

With the printer powered up but off line, press down on the
printer's operator panel switch for two seconds. The printer
then prints the demo page and the menu page.

Interfacing with your Computer

Your printer has a high-speed, bi-directional parallel IEEE 1284
interface port. Purchase a cable marked IEEE 1284 compliant.
To comply with FCC regulations, the cable must be shielded
and UL and CSA approved. Consult your PC manual for details
on cable requirements and interface ports on your computer.
!
OKIDATA has tested and approved the following bi-
directional cable: Part Number 70000803. See Service
and Support in the User's Guide for purchasing
information.
|
E-14 OKIPAGE 10e

Connecting the Cable

Make sure the printer and computer are off.
1 Insert the printer end of the cable firmly into the proper
connector on the back of the printer. Fasten the cable to
the printer securely.
2 Connect the other end of the cable to the proper connector
on your computer. Fasten the cable securely to your
computer.