Serial Ata (Sata) / Serial Ataii (Sataii) Hard Disks Installation; Serial Ata3 (Sata3) Hard Disks Installation - ASROCK P67 Extreme4 Gen3 User Manual

2.14 Serial ATA (SATA) / Serial ATAII (SATAII) Hard Disks Installation

This motherboard adopts Intel
ATAII (SATAII) hard disks and RAID (RAID 0, RAID 1, RAID 10, RAID 5 and Intel
Rapid Storage) functions. You may install SATA / SATAII hard disks on this mother-
board for internal storage devices. This section will guide you to install the SATA /
SATAII hard disks.
STEP 1: Install the SATA / SATAII hard disks into the drive bays of your chassis.
STEP 2: Connect the SATA power cable to the SATA / SATAII hard disk.
STEP 3: Connect one end of the SATA data cable to the motherboard's SATAII con-
nector.
STEP 4: Connect the other end of the SATA data cable to the SATA / SATAII hard
disk.

2.15 Serial ATA3 (SATA3) Hard Disks Installation

This motherboard adopts Intel
disks and RAID (RAID 0, RAID 1, RAID 10, RAID 5 and Intel Rapid Storage)
functions for SATA3_0 and SATA3_1 connectors. It also adopts Marvell SE9120
chipset that supports Serial ATA3 (SATA3) hard disks for SATA3_M1 and
SATA3_M2 connectors. You may install SATA3 hard disks on this motherboard for
internal storage devices. This section will guide you to install the SATA3 hard disks.
STEP 1: Install the SATA3 hard disks into the drive bays of your chassis.
STEP 2: Connect the SATA power cable to the SATA3 hard disk.
STEP 3: Connect one end of the SATA data cable to the motherboard's SATA3 con-
nector.
STEP 4: Connect the other end of the SATA data cable to the SATA3 hard disk.
Please be noted that SATA3_M1 and SATA3_M2 do not support RAID
function. If you want to use RAID function on SATA3 connectors, please use
SATA3_0 and SATA3_1 connectors.
®
P67 chipset that supports Serial ATA (SATA) / Serial
®
P67 chipset that supports Serial ATA3 (SATA3) hard
44