Change User Password
Select this item to set or change the user password. The User Password item on top of
the screen shows the default Not Installed. After you set a password, this item shows
Installed.
To set a User Password:
1.
Select the Change User Password item and press <Enter>.
2.
On the password box that appears, type a password composed of at least six
letters and/or numbers, then press <Enter>.
3.
Confirm the password when prompted.
The message "Password Installed" appears after you set your password successfully.
To change the user password, follow the same steps as in setting a user password.
2-32
Chapter 2: BIOS setup