Asus P5V-X SE User Manual page 46

9. Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that
supports either High Definition Audio or legacy AC '97 audio standard.
Connect one end of the front panel audio I/O module cable to this connector.
•
•
10. Speaker connector (4-pin SPEAKER)
This connector is for the chassis-mounted system warning speaker. The
speaker allows you to hear system beeps and warnings.
P5V-X SE Speaker Out Connector
1-34
Use a chassis that provides a high-definition audio front panel audio I/O to
use the high-definition audio features.
By default, this connector is set to [AC97]. If you want to connect a High-
Definition front panel audio module to this connector, set the Front Panel
Support Type item in the BIOS Setup to [HD Audio]. See page 2-22 for
details.
SPEAKER
1
Chapter 1: Product introduction