Table of Contents
Advertisement
2.5.5
Hardware Monitor
The items in this sub-menu displays the hardware monitor values automatically
detected by the BIOS. It also allows you to change CPU Q-Fan feature-related
parameters. Select an item then press <Enter> to display the configuration options.
Hardware Monitor
CPU Temperature
CPU Fan Speed
Chassis Fan1 Speed
CPU Q-Fan control [Disabled]
VCORE Voltage
3.3V Voltage
5V Voltage
12V Voltage
CPU Temperature
The onboard hardware monitor automatically detects and displays the CPU
temperatures. These items are not user-configurable.
CPU Fan Speed [xxxxRPM]
Chassis Fan Speed [xxxxRPM]
The onboard hardware monitor automatically detects and displays the CPU and
Chassis speeds in rotations per minute (RPM). If any of the fans is not connected
to the motherboard, the field shows 0. These items are not user-configurable.
CPU Q-Fan Control [Disabled]
Allows you to enable or disable the CPU Q-Fan control.
Configuration options: [Disabled] [Enabled]
Vcore Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output through
the onboard voltage regulators. Configuration options: [xxx] [Ignored]
2-28
[32.5ºC/90.5ºF]
[3125RPM]
[N/A]
[ 1.352V]
[ 3.184V]
[ 5.316V]
[11.827V]
CPU Temperature
Chapter 2: BIOS setup
Advertisement
Table of Contents
