Storage Configuration - Asus P5Q SE R User Manual

DMA Mode [Auto]
Selects the DMA mode. Configuration options: [Auto]
SMART Monitoring [Auto]
Sets the Smart Monitoring, Analysis, and Reporting Technology.
Configuration options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Enabled]
Enables or disables 32-bit data transfer. Configuration options: [Disabled]
[Enabled]
4.3.5

Storage Configuration

The items in this menu allow you to set or change the configurations for the
storage devices installed in the system. Select an item then press <Enter> if you
want to configure the item.
Storage Configuration
SATA Configurato
Configure SATA as
Hard Disk Write Protect
IDE Detect Time Out (Sec)
SATAConfiguration [Enhanced]
Allows you to enable or disable SATAconfiguration.
Configuration options: [Disabled] [Compatible] [Enhanced]
Configure SATA as [IDE]
Sets the configuration for the Serial ATA connectors supported by the
Southbridge chip. Configuration options: [IDE] [RAID] [AHCI]
Hard Disk Write Protect [Disabled]
Disables or enables device write protection. This will be effective only if device is
accessed throuh BIOS. Confiuration option: [Disabled] [Enabled]
IDE Detect Time Out (Sec) [35]
Selects the time out value for detecting ATA/ATAPI devices.
Configuration options: [0] [5] [10] [15] [20] [25] [30] [35]
4-14
[Enhanced]
[IDE]
[Disabled]
[35]
Options
Disabled
Compatiable
Enhanced
Chapter 4: BIOS setup