Usb Connectors; Front Panel Audio Connector - Asus P5P43T User Manual

8. USB connectors (10-1 pin USB78, USB910, USB1112)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specification that supports up to
480 Mbps connection speed.
P5P43T
P5P43T USB2.0 connectors
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB module cable is purchased separately.
9. Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel
audio I/O module cable to this connector.
P5P43T
P5P43T Analog front panel connector
• We recommend that you connect a high-definition front panel audio module to this
connector to avail of the motherboard's high-definition audio capability.
• If you want to connect a high-definition front panel audio module to this connector, set
the Front Panel Type item in the BIOS setup to [HD Audio]. If you want to connect an
AC'97 front panel audio module to this connector, set the item to [AC97]. By default, this
connector is set to [HD Audio]. See section 2.5.3 Onboard Devices Configuration for
details.
ASUS P5P43T
USB78 USB1112
PIN 1 PIN 1
PIN 1
PORT1 L GND
PORT1 R PRESENCE#
PORT2 R SENSE1_RETUR
SENSE_SEND
PORT2 L SENSE2_RETUR
HD-audio-compliant
pin definition
USB910
PIN 1
AAFP
PIN 1
MIC2 AGND
MICPWR NC
Line out_R NC
NC
Line out_L NC
Legacy AC'97
compliant definition
1-27