Panasonic Viera TX-P42G30B Operating Instructions Manual page 9

TV
1
2
3
4
5
11
6
1 CI slot (p. 51)
2 USB 3 port (p. 55, 92)
3 SD Card slot (p. 59)
4 HDMI4 terminal
5 Headphones jack
6 AV2 terminals
7 Function select
•
[Volume] / [Contrast] / [Brightness] / [Colour] /
[Sharpness] / [Tint] (NTSC signal) / [Bass] ∗ /
[Treble] ∗ / [Balance] / [Auto Setup] (p. 40)
∗ [Music] or [Speech] mode in the Sound Menu
Using the On Screen Displays
Many features available on this TV can be accessed via the On Screen Display menu.
Operation guide
Operation guide will help you to operate by using
the remote control.
Example : [Owner ID]
Owner ID
Please enter new PIN
PIN
* * * *
PIN entry
0 9
EXIT
Operation guide
Auto power standby function
The TV will automatically go to Standby mode in the following conditions:
• no signal is received and no operation is performed for 30 minutes in Analogue TV mode
• [Off Timer] is active in the Timer Menu (p. 19)
• no operation is performed for the period selected in [Auto Standby] (p. 34)
•
This function does not affect the recording of Timer Programming, Direct TV Recording and One Touch Recording.
F
TV
AV
12 13
(p. 92)
(p. 92)
(p. 92)
- Operation guide
8 Channel Up / Down, Value change (when using
the F button), Switching the TV On (press either
button for about 1 second when in Standby mode)
7
9 Changes the input mode
10 Mains power On / Off switch
8
•
Use to switch the mains power.
If you turned the TV Off during Standby
mode by the remote control last time, the TV
9
will be in Standby mode when you turn the
TV On with Mains power On / Off switch.
11 Remote control signal receiver
•
Do not place any objects between the TV remote
control signal receiver and remote control.
10
12 C.A.T.S. (Contrast Automatic Tracking
System) sensor
•
Senses brightness to adjust picture quality when
[C.A.T.S.] in the Picture Menu is set to [On]
13 Power and Timer LED
•
Red : Standby
Green : On
Orange : Timer Programming On
Orange (flash) :
Recording of Timer Programming,
Direct TV Recording or One Touch
Recording in progress
Red with orange flash :
Standby with Timer Programming On, Direct
TV Recording or One Touch Recording
•
The LED blinks when the TV receives a
command from the remote control.
How to use remote control
MENU
Open the main menu
Move the cursor / select the menu item /
select from a range of options
Move the cursor / adjust levels /
select from a range of options
Access the menu / store settings after
adjustments have been made or options
have been set
BACK/
RETURN
Return to the previous menu
EXIT
Exit the menu system and return to the
normal viewing screen
(p. 31)
9