Basic Connection - Panasonic Viera TX-P42G30B Operating Instructions Manual

Basic Connection

External equipment and cables shown are not supplied with this TV.
Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.
When disconnecting the mains lead, be absolutely sure to disconnect the mains plug at the socket outlet first.
Example 1
Connecting aerial
TV only
Rear of the TV
AC 220-240 V
50 / 60 Hz
Mains lead
(supplied)
Mains Lead
Push until both side
tabs click
To remove from the TV :
tabs
Press both tabs and pull on mains connector to
release
Note
•
Connect to the TV's AV1 for a DVD Recorder / VCR supporting Q-Link (p. 84).
•
For HDMI-compatible equipment, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3 /
HDMI4) by using HDMI cable (p. 90).
•
Q-Link and VIERA Link connection
•
Please also read the manual of the equipment being connected.
•
Keep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared
sensor. Otherwise, distortion of image / sound may occur or operation of other equipment may be
interfered.
10
Terrestrial aerial
Aerial input terminal
RF cable
Make sure that
the mains lead is
securely fixed.
(p. 82, 83)
Example 2
Connecting DVD Recorder / VCR
TV, DVD Recorder or VCR
Rear of the TV
AC 220-240 V
50 / 60 Hz
Mains lead
(supplied)
RF cable
Fully wired
HDMI
compliant
cable
HDMI AV
RF OUT
DVD Recorder or VCR
RF IN
Terrestrial aerial
Aerial input terminal
Fully wired
SCART cable
RF cable