Panasonic Viera TX-P42G30B Operating Instructions Manual page 58

■
To start One Touch Recording
Set the position to "TV"
DVD/VCR TV
•
No other channel can be selected while the recording is in progress.
■
To stop recording on the way
DVD/VCR TV
■
To playback or delete the recorded contents
•
Even if One Touch Recording is in progress, you can playback all the contents. However, the recording
may not work properly while playback.
Record constantly [Rewind LIVE TV]
Recording the currently viewed channel constantly.
Select [Auto] to start Rewind LIVE TV
Recording Setup
USB HDD Setup
One Touch Recording
Rewind LIVE TV
■
To operate the Rewind LIVE TV
Set the position to "TV"
DVD/VCR TV
•
To pause
•
After pausing or searching backward, the following buttons are available to operate.
search backward
playback / pause
search forward
stop (stops the current
operation and goes back to
live TV)
■
To stop the Rewind LIVE TV
Recording Setup
USB HDD Setup
One Touch Recording
Rewind LIVE TV
•
Rewind LIVE TV will be stopped and the recorded content deleted automatically in the following
conditions :
(Even if Rewind LIVE TV stops for the following conditions, as long as the setting is [Auto], the new
recording will start automatically in a condition that makes the recording available.)
• selected other channels
• selected locked channel
• selected invalid channel
• no TV signal
• when the other recording starts
• when the TV is turned off or standby
58
Start
REC
or
180 minutes
Auto
•
When you select [Auto], the recording will start automatically.
•
To search backward (up to 90 minutes)
(Press and hold)
Off
•
If you stop the Rewind LIVE TV, the recorded content for the
Auto
Rewind LIVE TV will be deleted.
EXIT
"Recorded TV mode" (p. 67)
select
access / store
search
pause /
backward /
playback
forward
(Press and
hold)
select [Off]
playback stop
stops the
current
operation and
goes back to
live TV