Panasonic WV-CL934 Operating Instructions Manual page 10

q Side cover
This cover is slid leftward to the lock
position.
w ALC lens connector
The ALC connector is connected to this
ALC lens connector. If the connector
shape is a different type, replace the
connector with the ALC connector (local-
ly procured).
e Tripod socket
This socket is used to mount the camera
mounting base (option). The tripod sock-
et can be mounted on either top or bot-
tom of the camera head.
(Tripod socket hole: 1/4-20 UNC for tri-
pod)
[Inside the side cover]
r External synchronization switch
( page 18)
t Operation buttons
This buttons are used to perform various
settings in the Setup menu.
J: Up button (UP)
K: Down button (DOWN)
L: Left button (LEFT), NEAR
M: Right button (RIGHT), FAR
I: Setting button (SET), ABF/MENU
y External synchronization input con-
nector
( page 14)
u Video output connector
The video output cable is connected to
this video output connector.
i Power indicator
This indicator lights up when the power is
on.
o External terminal ( page 18)
10
!0 Power connector (only for WV-CL930)
The included power cord is connected to
this power connector.
!1 Signal ground terminal
(only for WV-CL934)
The ground wire is connected to this ter-
minal.
!2 AC/DC power supply
(only for WV-CL934)
The power supply of 24 V AC or 12 V DC
is connected to this terminal.