Panasonic WV-CW504S Operating Instructions Manual page 26

Step 3
Move the cursor to "C/L ← → B/W" and select the back focus adjustment type from the following:
AUTO (default): Adjusts the back focus function automatically and corrects out of focus when switching between color and black-
and-white images.
PRESET: Performs the preset movement to each specified back focus position when switching between color and black-and-white
images. The preset position is the back focus position specified last time, which was automatically memorized for each of color
images and black-and-white images.
FIX: Fixes the position after adjusting the back focus either automatically (ABF) or manually.
Step 4
Moving the cursor to "SETUP-SW LOCK" and selecting "ON" allow users to disable the back focus adjustment with the operation
buttons (default: OFF).
Important:
• The following are recommendation for back focus setting in accordance with subjects.
For such case (subject conditions)
• Normal subject
• Frequently moving subj.
• S ubj. with remarkable illuminance
change
• Subj. with low illuminance
• Too bright or reflective subj.
• Subj. through a window
• P lace where the lens easily becomes
dirty
• S ubj. with less contrast such as white
wall
• Subj. with remarkable depth
• Subj. with heavy flicker
• S ubj. with horizontally parallel lines
such as a shutter
• We shall not responsible for any inconvenience, loss, or damage caused by the settings or results of the back focus function.
26
Select this (recommendation)
Back focus adjustment
"ABF"
Fine adjustment with "MANUAL-ADJ"
after "ABF" or "MANUAL-ADJ"
"C/L ← → B/W" switching
"AUTO"
"PRESET" or "FIX"