Remote Unit - American Audio UCD-200 Operating Instructions Manual

Professional dual cd/mp3 player

Hide thumbs Also See for UCD-200:

Table of Contents

GENERAL FUNCTIONS AND CONTROLS - REMOTE UNIT

Figure 3

22 21

Figure 4

REMOTE CONTROl - FACE (FIGURE 3)

1. OPEN/CLOSE (Disc Tray Open/Close) - This button is used to open and close the disc trans-

port tray door. NOTE: when a disc is loaded, the tray will not open unless the unit is in pause or cue mode.

2. SOURCE SELECTOR - Press this button to select your desired playback source. Select either CD Player,

USB 1, or USB 2. The source indicator LED will light when the selected source is activate.

3. TIME - The TIME button is used to change the displayed time values. Time can be displayed

as elapsed track time, remaining track time, and total disc remaining time. Total disc remaining time can only

be displayed for standard CDs.

4. LIqUID CRYSTAL DISPLAY (LCD) - This high quality LCD indicates all the functions (play, pause, cue,

etc..,), as they occur. This display is viewable at several comfortable angles as described on page 6. The LCD

icons will be described in the next section.

5. PITCH SLIDER - This slider is used to adjust the playback pitch percentage when the PITCH (8) function

is activated. The slider is a set adjustment and will remain set until the pitch slider is moved or the PITCH (8)

function has been turned off. The maximum pitch range of the slider is +/-100%. This adjustment can be made

with or without a music source. The pitch adjustment will remain even if a music source has been removed,

and will reflect on any other music source that is loaded into the unit. That is to say, if you set a +2% pitch on

one music source, remove it and insert another, that music source will also have a +2% pitch. The amount of

pitch being applied will be displayed in the LCD (4). Use this slider to match the BPM's of this unit to that of

another music source. By changing the pitch of one music source with respect to the other in this way, the

beats can be matched.

6. SGL/CTN - This button allows the unit's play mode to change between Single and Continuous. In single

mode the unit will play a single track and return to cue mode. In continuous mode the unit continues to play

American Audio

- www.americanaudio.us - UCD-200 Instruction Manual Page 8

Table of Contents