Chapter 3 - Installation; Initial Setup; Lan Cable - Buffalo NFINITI High Power WZR-300HP User Manual

Chapter 3 - Installation

Initial Setup

To configure your AirStation, follow the procedure below.
1
Verify that you can connect to the internet without the AirStation, then turn off your modem
and computer.
2
modem
3
4
Plug one end of the LAN cable into your modem and the other end to the AirStation's
Internet (WAN) port. Turn on the modem.
modem
2) disconnect
Confirm that the
switch is positioned to
[AUTO].

LAN cable

1) connect
2) connect
Unplug the LAN cable which connects
your computer and modem.
OFF
computer
Make sure the mode switch on the back of
the AirStation is in the "auto" position.
Internet
port
AirStation
- 12 -