Installation Congratulations on your new purchase! To install the AirStation WZR-G300N Wireless Router and Access Point, insert the AirNavigator for Routers and Access Points CD in your computer and follow the steps shown. The program will step you through connecting your equipment and setting up your Internet connection.
Page 3
Connecting your AirStation Power to outlet or power strip Cable or DSL Modem...
Page 4
AOSS (AirStation One-Touch Secure System) is a simple system for configuring your wireless network securely. If your router and your client device are installed and both support AOSS, then making a secure wireless connection between them is simple. Push the AOSS button on the top of your router and hold it in for a few seconds. The AOSS light will begin to flash amber.
Page 5
Connect non-AOSS Clients If a wireless client doesn’t support AOSS, you’ll have to configure it manually. Using the same SSID and encryption information that you entered during router configuration, enter the required credentials for each of your wireless clients. Consult your wireless client’s documentation for instructions on configuring it to work with your new...
Page 6
Congratulations! Your AirStation is installed and the basic setup has been configured. For advanced settings and more detailed information, consult the User Manual, located on your AirNavigator for Routers and Access Points CD-ROM. Technical Support: North American Technical Support by phone is available 24 hours a day, 7 days a week. (USA and Canada).