ActionTec GT701D User Manual page 73

7. The "Internet Protocol (
8. In the General tab, make sure the radio button next to "Use the following
Address" is active (contains a black dot). If the radio button is already active,
leave it alone.
9. Enter the following address in the "
Enter the periods in the address by pressing the space bar on the keyboard.
10. Enter the following address in the "Subnet mask" text box:
Enter the periods in the address by pressing the space bar on the keyboard.
11. Enter the following address in the "
Enter the periods in the address by pressing the space bar on the keyboard.
12. Click OK. The Internet Protocol (
13 In the Local Area Connection Properties window, click Close
Connection Properties window disappears.
14. Click Close in the Local Area Connection Status window. The window disappears.
Actiontec DSL Modem User Manual
) Properties" window appears.
TCP/IP
IP
192.168.0.2
255.255.255.0
Default gateway
192.168.0.1
TCP/IP
70
Address" text box:
" text box:
) Properties window disappears.
IP
The Local Area
.