ActionTec GT701D User Manual page 59

Actiontec DSL Modem User Manual
Ensure the Subnet Mask address is set to 255.255.255.0 by clicking Status in
the strip of icons at the top of any Modem GUI screen.
Verify the Modem's settings are the same as the computer by clicking Status in
the strip of icons at the top of any Modem GUI screen.
If running Windows 2000 or XP, check the computer's TCP/IP settings.
Select Start, Run, enter
in the "Open" text box, then press OK. A "
ing cursor (prompt). Enter
ipconfig
at the cursor, then press Enter on the keyboard.
The address of the Ethernet adapter should appear in the
IP
Ensure the address in the 192.168.0.x network (with "x" defining a range
IP
from 2 though 255).
If the Ethernet adapter is showing an incorrect
ipconfig /release
at the cursor, then press Enter on the keyboard, which sets all values back to
0 (zero). Next, enter
ipconfig /renew
at the cursor, then press Enter on the keyboard (this process may take a few
seconds). The renewed
If an error occurs, or the
192.168.0.x network, contact the
Ensure the browser is set to "Never dial a connection" and there are no pre-
vious LAN settings.
To check this, go to Start, Settings, Control Panel. In the Control Panel,
double-click Internet Options. When the "Internet Properties" window
appears, ensure that the "Never dial a connection" option is activated, then
Settings. When the "Local Area Network (LAN) Settings" window
click
LAN
appears, ensure that no settings are activated. If there are settings activated,
deactivate them.
Shutdown and restart the computer. After the computer restarts, unplug the
power cord from the Modem and plug it back in. When the lights glow solid
green, try accessing the Internet.
CMD
address should be on the 192.168.0.x network.
IP
address renews with an address outside the
IP
immediately
ISP
56
" window appears, with a blink-
DOS
address, enter
IP
window.
DOS