Gigabyte GA-Z77X-UD5H User Manual page 96

Step 2: The next screen displays the two hard drives you installed. Press <Enter> or <Space> on the two hard
drives respectively to add them into the RAID array. Selected hard drives are marked with an asterisk (Figure
6). Then press <Enter> on NEXT.
Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd.
[ Adapter] [ Devices]
Select free disks to create
Port Disk Name
* S0 SATA: WDC WD800JD-22LSA0
* S1 SATA: WDC WD800JD-22LSA0
NEXT
ENTER/SPACE: Select, ESC: Back/Exit
Step 3: On the Create VD menu (Figure 7), use the up or down arrow key to move the selection bar to select
an item and press <Enter> to display options. Set the required items in sequence and press the down arrow
key to proceed to the next item.
Sequence:
1. RAID Level: Select a RAID level. Options include RAID 0 (Stripe) and RAID 1 (Mirror).
2. Stripe Size: Select the stripe block size. Options include 32 KB, 64 KB, and 128 KB.
3. Quick Init: Select whether to quickly erase old data on the hard drives when creating the array.
4. Cache Mode: Select write-back or write-through cache.
5. VD Name: Enter an array name with 1~10 letters (letters cannot be special characters).
Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd.
[ Adapter] [ Devices]
Select free disks to create
Port Disk Name
Create VD
* S0 SATA: WDC WD800JD-22LSA0
RAID Level :
RAID0
* S1 SATA: WDC WD800JD-22LSA0
Max Size (MB): 152478
Stripe Size : 64KB
Quick Init : NO
Cache Mode : WriteBack
VD Name :
Disks ID : 01
NEXT
ENTER/SPACE: Select, ESC: Back/Exit
Appendix
[ RAID ]
RAID Config
Size Max Speed
76.3GB SATA 3Gb/s FREE
76.3GB SATA 3Gb/s FREE
Figure 6
[ RAID ]
RAID Config
Size Max Speed
76.3GB SATA 3Gb/s FREE
76.3GB SATA 3Gb/s FREE
Figure 7
- 96 -
Status
Status