Gigabyte GA-Z77X-UD5H User Manual page 97

6. NEXT: After completing the settings above, move to NEXT and press <Enter> to begin creating the array.
When prompted to confirm, press <Y> to confirm or <N> to cancel (Figure 8).
Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd.
[ Adapter] [ Devices]
Select free disks to create
Port Disk Name
Create VD
* S0 SATA: WDC WD800JD-22LSA0
RAID Level :
* S1 SATA: WDC WD800JD-22LSA0
Max Size (MB): 152478
NEXT
Stripe Size : 64KB
Quick Init : NO
Cache Mode : WriteBack
VD Name : GBT
Disk ID : 01
NEXT
Create the VD?[Y]
When completed, the RAID tab will display the new array. (Figure 9)
Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd.
[ Adapter ] [ Devices ]
[Virtual Disks]
ID Name
0 GBT
[Physical Disks]
Port Disk Name
S0 SATA: WDC WD800JD-22LSA0
S1 SATA: WDC WD800JD-22LSA0
ENTER/SPACE: Select, ESC: Back/Exit
To exit the RAID BIOS utility, press <Esc> on the main screen and press <Y> to confirm.
Now, you can proceed to install the operating system.
[ RAID ]
RAID0
Figure 8
[ RAID ]
Size Level Status
152.4GB RAID0 ONLINE
Size
76.3GB
76.3GB
Figure 9
- 97 -
RAID Config
Size Max Speed Status
76.3GB SATA 3Gb/s FREE
76.3GB SATA 3Gb/s FREE
Stripe CacheMode
64KB WriteBack
Max Speed Status
SATA 3Gb/s ASSIGNED
SATA 3Gb/s ASSIGNED
Appendix