DC-In Port
Removing DC-in Port
1.
Follow the procedures in
ATG Handle (only for E6420 ATG systems).
2.
Remove the
ATG Port Cover (only for E6420 ATG systems).
3.
Remove the
Battery .
4.
Remove the
Secure Digital Card .
5.
Remove the
Base Cover .
6.
Remove the
ExpressCard .
7.
Remove the
Optical Drive .
8.
Remove the
Memory .
9.
Remove the
Hard Drive .
10. Remove the
WLAN Card .
11. Remove the
WWAN Card .
12. Remove the
Coin Cell Battery .
13. Remove the
Heat Sink and Processor .
14. Remove the
Bluetooth Card .
15. Remove the
Keyboard Trim .
16. Remove the
Keyboard .
17. Remove the
Modem Card .
18. Remove the
Palmrest Assembly .
19. Remove the
ExpressCard Cage .
20. Remove the
System Board .
21. Remove the
22. Remove the screw securing the DC-in bracket.
Before Working On Your Computer .
29
99