Installing The Heat Sink - Dell Latitude E6420 Owner's Manual

11. Remove the processor from the system.

Installing The Heat Sink

1. Insert the processor back into the system.
2. Rotate the processor cam lock in a clockwise direction.
3. Place the heat sink assembly into the system.
4. Tighten the four screws securing the heat sink.
5. Connect the heat sink assembly cable.
Base Cover .
6. Install the
Secure Digital (SD) Card .
7. Install the
Battery .
8. Install the
ATG Port Cover (only for E6420 ATG systems).
9. Install the
ATG Handle (only for E6420 ATG systems).
10. Install the
11. Follow the procedures in
After Working Inside Your Computer .
49