Smart Card Reader
Removing the Smart Card
1.
Follow the procedures in
ATG Handle (only for E6420 ATG systems).
2.
Remove the
ATG Port Cover (only for E6420 ATG systems).
3.
Remove the
Battery .
4.
Remove the
SD Card .
5.
Remove the
Base Cover .
6.
Remove the
Hard Drive .
7.
Remove the
Keyboard Trim .
8.
Remove the
Keyboard .
9.
Remove the
Palmrest Assembly .
10. Remove the
11. Remove the Smart Card Reader cable from the system board.
12. Remove the screws securing the Smart Card Reader to the computer.
Before Working On Your Computer .
22
69