Accessing Ipod Mode; Ipod®/Iphone® Operation - Jensen VM9215BT Operating Instructions Manual

VM9215BT
iPod®/ iPhone® OPERATION
This unit is Made for iPod® and iPhone®. You can control your iPod® and iPhone®
via the touch screen to access Playlist, Artist, Albums, Songs, etc. Supported
models include, but are not limited to the following:
• iPhone® 4S / 4 / 3GS / 3G and 1st Generation
• iPod® touch 4th / 2nd and 1st Generation
• iPod® nano 6th / 5th / 4th and 3rd Generation
• iPod® classic and iPod® with video
NOTE: Be sure your iPod® has the latest Apple fi rmware installed to avoid
connectivity issues.
Opening/Closing the TFT Monitor
Open TFT Monitor
Press the OPEN button on the front panel or press the
control to activate the mechanism that moves the display panel into the viewing
position.
Close TFT Monitor
Press the OPEN button on the front panel or press the
control to load the display panel back into the compartment.
Accessing iPod® Mode
The unit will automatically switch to iPod® mode when an iPod®, iPod® touch or
iPhone® is plugged into the front or rear USB connector.
NOTE: For basic iPod® connectivity, you can use the white 30-pin to USB iPod cable
that came with your Apple device . For iPod® video or photo playback, you must
purchase the jLink-USB cable.
To return to the iPod® menu from any other source menu, touch SRC on the front
panel until the iPod® menu appears on the screen, or choose the iPod® icon from
the source menu (only available when an iPod® or iPhone® is connected to the USB
connector).
button on the remote
button on the remote
57