Adjusting Clock; Initial Settings Before Operations - Kenwood KDC-252U Instruction Manual

Adjusting the clock
1
Press the volume knob to enter
[FUNCTION]
mode.
2
Turn the volume knob to select
[SETIINGS],
then press to enter.
3
Turn the volume knob to select
[CLOCK],
then press to enter.
4
Press the volume knob to select
[CLOCK ADJUST]
I
[CLOCK ADJ].
Clock hour flashes on the display.
5 Turn the volume knob to adjust the hour, then press to enter minute adjustment.
Clock minutes flashes on the display.
6 Turn the volume knob to adjust the minute, then press to confirm.
Press~ I~
to move between the hour and minute adjustment.
7
Hold~
to finish the procedure.
Initial settings before operations
1
Press t!J
SRC
to enter
[STANDBY]
mode.
2
Press the volume knob to enter
[FUNCTION]
mode.
3 Turn the volume knob to select [INITIAL SET], then press to enter.
4 Turn the volume knob to make a selection, then press to confirm.
See table below for selection.
5
Hold~
to finish the procedure.
PRESET TYPE NORMAL/ NORM*: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ AM).;
MIX: Memorizes one station for each preset button regardless of the selected band (FM 1
I
FM2/ FM3/ AM).
KEY BEEP ON*
I
OFF: Activates/deactivates the keypress tone.
BUll T-IN AUX/ ON*: Enables" AUX" in source selection. Sound of the connected external component is produce through the
BUll TIN AUX car speakers.; OFF: Disables" AUX" in source selection.
CD READ 1 *:Automatically distinguishes between audio file disc and music CD.; 2: Forces to play as a music CD. No
sound can be heard if an audio file disc is played.
SWITCH PRE For
e:otellf118 e:oit1e)11813•II&hillf1111:1•II~hJIJftlll:i&li1~1nl8:
REAR*
I
SUB-W: Selects whether rear speakers or a subwoofer are connected to the line out terminals on
the rear of the unit (through an external amplifier).
SP SELECT OFF*
I 514/
6
x
9161
OEM: Selects the speaker size for optimum performance.
FIW UP xx.xx YES*: Starts upgrading the firmware.; NO: Cancels (upgrading is not activated).
For details on how to update the firmware, see: www.kenwood.com/cs/ce/
About
11
KENWOOD Music Editor"
• This unit supports the PC application "KENWOOD Music Editor Light ver1.1" or later.
• When you use the audio file with database information added by the "KENWOOD Music Editor Light ver1.1," you can
search a file by title, album or artist name using Music Search.
• In the Instruction manual, the term "USB device" is used to mean the device that contains audio files with database
information added with KENWOOD Music Editor.
• "KENWOOD Music Editor Light ver1.1" is available from the following web site: www.kenwood.com/cs/ce/
• For further information on "KENWOOD Music Editor Light ver1.1," refer to the site above or the application help.
8