Selecting An Audio Source Or Toggling Between Audio Sources - Sennheiser RS 220 Instruction Manual

Using the RS 220
Selecting an audio source or toggling between audio
sources
You can connect different audio sources to the transmitter. Once you have
connected an audio source, you then have to select the audio source.
If you have connected different audio sources
toggle between the audio sources:
E
Touch the touch key for selecting the audio source
mitter or press the Input
Press the buttons repeatedly until
one of the following displays lights up
Analog
Coaxial
Optical
The selected input ("IN") on the transmitter is retained in memory when
the transmitter is switched off.
to the transmitter, you can
0
0
button on the headphones.
Selected input ("IN")
on the transmitter
ANALOG IN
COAXIAL IN
OPTICAL IN
E
on the trans-
RS 220 | 21