Table of Contents
Advertisement
concrete walls, etc. as this can decrease the transmitter's
range.
Connect the transmitter's audio connection cable:
• either directly to the headphone socket or
• to the 1/4" (6.3 mm) adapter and a corresponding
headphone socket.
Set the volume for the headphone output of your audio
source to a medium level. If the headphone output volu-
me is set too low, the transmitter automatically switches
off.
Some TVs have a function that mutes the TV loud-
speakers when you connect a transmitter. If neces-
sary, change this setting via the operating menu of
your TV.
Connecting the transmitter to the mains
Connect the mains unit to the socket at the rear of the
transmitter. Plug the mains unit into a wall socket. The
transmitter switches on and the
green.
Preparing the headphones for use
Opening the battery compartments
2
Turn the ear pads in the direction of the arrow until you
overcome a slight resistance and lift them off the ear
cups.
Inserting and replacing the rechargeable batteries
3
CAUTION
Only use NiMH rechargeable batteries, never
use standard batteries!
Insert the supplied rechargeable batteries. Secure the ear
pads to the ear cups.
Charge the rechargeable batteries for at least 24 hours
prior to first time use. Subsequent charging time
d epends on the previous operating time and is up to
18 hours max.
2
ON/OFF
LED lights up
Advertisement
Table of Contents
