Control Panel; Rear Terminals - Panasonic PT-LX30HU Operating Instructions Manual

Control panel

(8)
(7)
(6)
(1) <SELECT> Button
Execute the selected item.
(2) ▲▼◄► (VOL -/+) Buttons
Navigate the MENU screen.

Rear terminals

(6)
SERIAL IN
(7)
(1) VIDEO IN
Connect to VIDEO input signals.
(2) COMPUTER AUDIO IN
Connect to the audio input signals.
(3) COMPUTER 1 IN/ COMPONENT IN/S-VIDEO IN
Connect to COMPUTER IN 1/ COMPONENT IN/
S-VIDEO IN input signals.
(4) COMPUTER 2 IN/ MONITOR OUT
Connect to COMPUTER IN 2/ MONITOR OUT
input signals or outputs the analog RGB signals
input the projector.
(5) LAN
Connect to a LAN cable for network connection.
(6) SERIAL IN
Connect to a computer via an RS-232C cable.
(5)
(3) <AUTO SETUP> Button
Execute the setting of Auto setup in the [setting]
menu.
(4)
(4) <
Turn the projector on/off.
(3)
(5) <STANDBY(R)/ON(G)> indicator
Indicate the power status.
(6) <MENU> Button
(2)
Display the MENU screen. (
(7) <LAMP> indicator
Light yellow when the projection lamp reaches
(1)
its end of life.
(8) <WARNING> indicator
Indicate the abnormal conditions of the projector.
(5) (4)
COMPUTER 2 IN
LAN
(7) Security slot
Attach the commercial shackle lock, manufactured
by Kensington, to protect your projector.
Compatible with the Kensington MicroSaver
Security System.
(8) AUDIO IN
Connect to the audio input signals.
AUDIO IN has right and left (L and R) terminals.
Attention
When a LAN cable is directly connected to the projector,
z
the network connection must be made indoors.
About Your Projector
> Button
Æ
(3) (2) (1)
COMPUTER 1 IN / COMPUTER
VIDEO IN
COMPONENT IN
AUDIO IN
S-VIDEO IN
R
AUDIO IN
L
(8)
page 36)
19
ENGLISH -