Network Setting - Panasonic PT-CX200U Operating Instructions Manual

NETWORK menu (continued) NETWORK menu (continued)

Network setting

You can make detailed wired LAN settings.
1
Press ▲ ▼ to select [Network setting], and press <SELECT> button.
The detailed [Network setting] screen will be displayed.
2
Press ▲ ▼ to select an item, and change the setting according to the instructions.
DHCP

(DHCP client function)
IP address

(Display of IP address and setting)
Subnet mask

(Displaying and setting the subnet mask)
Gateway

(Display of gateway address and setting)
DNS
(Display of Preferred DNS server
address and setting)
"Glossary" (See page 24)

3
Press ▲ ▼◄► to select [Set], and press <SELECT> button.
Save the current network settings.
Before using the DHCP server, make sure the DHCP server is already functioning.
For details of IP address, subnet mask, gateway and DNS, ask the network administrator.
Default wired LAN settings

The following settings are set before the projector leaves the factory.
Parameter
DHCP
IP ADDRESS
SUBNET MASK
GATEWAY ADDRESS
DNS ADDRESS
On: If a DHCP server exists in the network to which the
projector is connected, the IP address will automatically be
acquired.
Off:
If a DHCP server does not exist in the network to which
the projector is connected, additionally set [IP address
[Subnet mask
Enter the IP address if DHCP server is not used.
If not using a DHCP server, enter the subnet mask.
Enter the gateway address if DHCP server is not used.
Enter the DNS server address if DHCP server is not used.
LAN 1
OFF
169.254.100.100
255.255.0.0
255.255.255.255
255.255.255.255
] and [ Gateway
 
SELECTED LAN
LAN 2
ON
192.168.100.100
255.255.255.0
255.255.255.255
255.255.255.255
],

].
LAN 3
OFF
192.168.100.100
255.255.255.0
255.255.255.255
255.255.255.255
7