Panasonic PT-CX200U Operating Instructions Manual page 20

Using Web Browser (continued)
Network page
The IP Address, Subnet Mask, Default Gateway, DNS (Domain Name Server) and projector name are setup on
this menu.
1 Displays the selected LAN mode.
2 Sets DHCP configuration.
3 Sets IP address of the projector.
4 Sets Subnet mask.
5 Sets IP address of the default gateway (Router).
6 Sets IP address of the DNS server. Must be set when using the
e-mail function.
7 Sets name of the projector. (64 characters maximum)
Information page
This page is to display the basic information of the projector status. Click Update button to update the information.
1 Displays selected input and source.
2 Displays selected signal system.
3 Displays input signal status.
4 Displays screen mode.
5 Displays lamp status with an icon.
6 Displays the security (PIN code lock) status.
20
1
2
3
4
5
6
7
1
2
3
4
5
6
7
8
9
10
11
7 Displays the accumulated run time of the projector.
8 Displays the run time (Corresponding value) of the lamp.
9 Displays the accumulated run time of the filter.
10 Displays MAC address of the projector.
11 Displays the IP address of the projector.