Introduction; Inlink; Installing The Stand Or Wall-Mount Bracket; Installing The Stand - Insignia NS-46E340A13 User Manual

Introduction

Congratulations on your purchase of a high-quality
Insignia product. Your NS-46E340A13 represents
the state of the art in LED TV design and is designed
for reliable and trouble-free performance.

INlink

Enjoy the benefit of having HDMI CEC compatible
products plug and play! No setup is needed! CEC
technology lets different components discover and
communicate with each other. (See page
instructions on how to use INlink.)
Installing the stand or
wall-mount bracket
Notes
• If you plan to wall-mount your TV, do not install
the stand.
• Store the stand and stand screws in case you
decide to use the stand in the future.

Installing the stand

To install the stand:
1 Carefully place your TV face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2 Secure the base to the stand column with the
four provided screws.
Screw type Screw length # of screws
M4
4
Insignia 46" LED TV
43 for
12 mm 4
www.insigniaproducts.com
NS-46E340A13 Insignia 46" LED TV

Installing a wall-mount bracket

Warning
This TV is intended to be supported by a UL Listed
wall mount bracket with suitable weight/load. (See
"Miscellaneous" on page 54.)
To attach your TV to a wall-mount bracket:
1 Carefully place your TV face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2 Remove the four screws that secure the stand
column to the TV, then remove the stand
column.
Stand column
3 Secure the stand cover to the back of the TV
using the four screws you just removed.
Stand cover