Insignia NS-46E340A13 User Manual page 24

4 Press or to highlight Mode, then press
or to select Manual (to set the date and
time manually) or Auto (to set the date and time
automatically from a TV signal source based on
the time zone your select).
5 Press or to highlight Time Zone, then press
or to select your time zone. You can select
Eastern, Central, Mountain, Pacific, Alaska,
Hawaii, Atlantic, or Newfoundland.
6 Press or to highlight Daylight Savings,
then press or
area observes Daylight Savings Time) or Off (if
your viewing area does not observe Daylight
Savings Time).
7 If you selected Manual for Mode, set the date
by pressing or
Day, then press
8 If you selected Manual for Mode, set the time
by pressing or
pressing or
AM/PM field. Press
9 Press ENTER. The Choose Your Picture Mode
screen opens.
Choose Your Picture Mode
Move
ENTER
Reduces total power consumption
10 Press or to highlight Home Mode or Retail
Mode, then press ENTER.
If you selected Retail Mode, a message appears
"If you select Retail Mode, then energy savings
are not realized. Are you sure?" Select Yes to
continue, or select No to change your selection.
20
to select On (if your viewing
to highlight Year, Month, or
or to adjust the setting.
to highlight Time, then
to select the hour, minute, or
or to adjust the setting.
Home Mode
Retail Mode
OK
Select Previous Exit
MENU EXIT
www.insigniaproducts.com
NS-46E340A13 Insignia 46" LED TV
The Choose Your TV source screen opens.
Choose Your TV Source
Antenna
Cable
Satellite Box
OK
Move Select
ENTER
Select if using an antenna for standard or HD TV.
11 Press or to highlight Antenna, Cable, or
Satellite Box, then press ENTER.
A If you select Antenna, your TV scans for
available channels. The scan may take
several minutes.
Scanning for Channels
0 Digital Channels
0 Analog Channels
Channel scan may take 20+ minutes
OK
Move Select
ENTER
Channel scan may take 20+ minutes
During scanning, your TV searches for
digital channels first. When the digital
channel search is complete, a message
appears asking if you want to search for
analog channels. Select Yes to continue
searching for analog channels, or select No
to stop searching for channels.
Note
You can press EXIT to stop the auto channel search,
but you will need to run the auto channel search
again to create a channel list.
Previous Exit
MENU EXIT
Previous Exit
MENU EXIT