Asus P5G41C-M LX User Manual page 37

4. Serial ATA connectors (7-pin SATA1-4)
These connectors are for the Serial ATA signal cables for Serial ATA 3Gb/s hard disk
and optical disk drives. The Serial ATA 3Gb/s is backward compatible with Serial ATA
1.5Gb/s specification. The data transfer rate of the Serial ATA 3Gb/s is faster than the
standard parallel ATA with 133 MB/s (Ultra DMA133).
P5G41C-M LX
P5G41C-M LX SATA connectors
Install the Windows
5. USB connectors (10-1 pin USB56, USB78)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specification that supports up to
480 Mbps connection speed.
P5G41C-M LX
P5G41C-M LX USB2.0 connectors
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB module cable is purchased separately.
ASUS P5G41C-M LX
SATA1 SATA2 SATA3
XP Service Pack 2 or later version before using Serial ATA.
®
USB56 USB78
PIN 1
SATA4
PIN 1
1-27